The term “cyborg” was coined by NASA scientists Manfred Clynes and Nathan Kline in 1960 when discussing the hypothetical advantages of human-machines in space. Although such cybernetic organisms became the realm of science fiction, efforts to create real-life cyborgs began even before the term was conceived and continue to this day.

· In 1950 José Delgado of Yale University inserted electrodes onto a bull’s brain to gain crude control over its movements. He successfully demonstrated this control in Córdoba, Spain in 1963 when he stood in the path of a charging cyborg bull and steered it away at the last moment.

· The Central Intelligence Agency (CIA) attempted to create its own cyborg in 1961 in Operation Acoustic Kitty, in which a cat was cut open and fitted with an array of wires (one to override feelings such as hunger) and a listening device that utilized its tail as an antenna. The project was disbanded as a failure in 1967 when the cat on its first mission (to eavesdrop on the Soviet compound in Washington, D.C.) was killed by a moving taxi sending more than five years of intensive training and $15 million down the drain.

Afterwards, cyborg research remained dormant until the late 1980s, picking up steam a decade later. By this time, science and technology had advanced significantly, especially with the miniaturization of devices and components.

As cybernetic technology is further developed and refined, the seamless synthesis of organic and artificial parts is likely to become widespread requiring modification of basic definitions of life and its associated rights, creation of applicable international protocols and an adjustment in thought perceptions. Cybernetic technology is likely to have three major applications:

Military/Intelligence/Law Enforcement:

Early efforts involving animal experiments were primarily aimed towards military/intelligence/law enforcement applications. A few of the notable experiments are listed below:

· Per an article by Bill Christensen of Technovelgy.com (Jack Into A Cat’s Brain) scientists successfully produced a video of a recognizable moving scene as observed through a cat’s eyes in 1999. This was accomplished through the use of electrodes that simultaneously recorded and catalogued responses in the lateral geniculate nucleus (LGN) and 177 selected brain cells of a sharp-eyed cat. Though the images were not as sharp as those seen by human eyes and recorded by camcorders, technology continues to improve. In the near future adjustments will likely enhance clarity and quality of feline vision and cats selected for surveillance operations may even have their natural eyes replaced with cybernetic devices equipped with miniature cameras (a moral concern).

· In 2002, a team led by John Chapin at the State University of New York (SUNY) created cyborg rats by implanting electrodes on their brains. They were then trained to move in accordance to impulses delivered via the electrodes and to seek specific scents (e.g. human, explosives, exploding dye, etc.). When tested, each cyborg rat was fitted with a tiny camera to provide indication of mission success. The rats were then successfully guided to a specific location via radio-controlled impulses. Afterwards, the implants were powered down and as soon as the rats realized they were free of their control, they went into a sniffing mode and successfully identified the source of a target odor. The process took only a few minutes and was successfully duplicated in additional tests.

· In 2005, a team of scientists led by Su Xuecheng at the Shandong University of Science and Technology in Qingdao, China, successfully controlled pigeon flight (direction and ascent/descent) via wireless signal transmitted to electrodes implanted onto their brains from a laptop computer. Similarly, in 2006, Jelle Atema of Boston University controlled directional movement of a spring dogfish (a small type of shark) via a neural implant that stimulated the left or right olfactory area of its brain.

In light of such success, the U.S. Department of Defense (DoD) and U.S. Defense Advanced Projects Agency (DARPA), the latter which has been disbanded, have also made significant progress. The latest phase of the DoD’s efforts – the development of Hybrid Insect Micro-Electro Mechanical Systems (HI-MEMS) – is focused on “small” (to create inconspicuous cyborgs) and reliance on insect flight, which is unmatched with regard to agility. Experiments have been conducted on beetles, flies and moths.

Since 2008 several milestones have been accomplished:

· Tobacco hornworms fitted with miniature electronic implants survived and grew into adult Manduca moths with no complications. X-rays unveiled at the 2008 Micro-Electro Mechanical Systems (MEMS) conference held in Tucson, Arizona showed good tissue growth around probes that had been implanted where abdominal segments would have grown during the larval stage after a portion of their thorax was removed to make room for the implants. Hookworms fitted with cybernetic devices showed no signs of complications, adverse impairments or rejection during metamorphosis.

· A video, created at the Boyce Thompson Institute in Ithaca, New York documenting successful control of moth flight was also shown during the 2008 MEMS conference. Moth movement was controlled by a series of 5-volt shocks that stimulated their wing muscles delivered via tethered wires. Uniform stimuli determined wing-speed resulting in ascent/descent while stimuli applied to wing muscles on one side or the other determined direction.

· A similar process used by a team of researchers led by Michel Maharbiz of the University of California (UNC) Berkeley succeeded with Green June Beetles. Negative impulses from neural implants (transmitted via tethered wires) activated the beetles’ wings resulting in ascent; positive impulses halted their wing movement resulting in descent. Lift and descent were controlled by rapid switching between the two types of impulses. At the same time, directional control of beetle flight was achieved in two ways – via a mounted LED in front of their eyes and by impulses to either its left or right basilar muscle.

· The same UNC Berkeley team unveiled a wireless system that successfully controlled Rhinoceros Beetle flight during the 2009 MEMS conference held in Sorrento, Italy.

The present objective of the DoD funded research is to create insect cyborgs that can be remotely controlled from at least 100 meters away, directed to land within a maximum of 5 meters from a target subject, and remain there until directed to leave. When this is successfully mastered (overcoming barriers such as high winds), miniature cameras can be implanted for surveillance, sensors to detect biological, chemical, or radiological agents, and tiny weapons (utilizing potent poisons and hallucinogenic drugs) to attack potential targets.

Medical:

The second major application of cybernetic research is to develop technology to medically restore or enhance human capabilities (e.g. vision – limited with regard to distance, viewing and small objects, etc.; communication – limited to speech and writing).

In 2002, Kevin Warwick, a leading expert on cybernetic technology became the world’s first human cyborg (documented in I, Cyborg, University of Illinois Press, Chicago, IL, 2004) in an effort to facilitate research aimed at these objectives. A 3-millimeter-wide silicon square with 100 electrodes was implanted into his wrist to enable scientists to interpret nerve signals arising from movement and sensation with the hope of providing breakthroughs for the paralyzed.

Cybernetic technology is, at a minimum, from a medical standpoint, being directed at several areas. A summary of progress and future aspirations for these areas is listed below:

Sight:

· In February 2007 Gingersnap, a 4-year-old Abyssinian cat suffering from a condition similar to retinitis pigmentosa (an incurable genetic disease that attacks the eye’s photoreceptor cells leading to blindness) was implanted with 2-millimeter-wide artificial silicon retina (ASR) chips (each covered by 5,000 microphotodiodes that react to light. When these microphotodiodes react, electric signals are sent through the eye’s optic nerve to the brain allowing it to detect light impulses) manufactured by Optobionics to preserve her vision. As technology improves, additional data will likely be able to be transmitted enabling the brain to decipher complete images.

· Retinal implants are currently in use to combat macular degeneration (a disorder that results in loss of vision in the macula located at the center of the eye, which makes it difficult to see fine details).

· Contact lenses called “I, Contact” that interface with a computer mouse, in which eyeball movement controls cursor movement, have been developed to assist the disabled.

· Researchers at the University of Washington, having developed contact lenses with electronic circuits and red-LEDs, are working on lenses (ultimately to be powered by human neural electrical activity) that could one day provide tele/microscopic vision, enable people to view the infrared portion of the light spectrum, take pictures, make videos, and even superimpose images accessed from the Internet via WiFi.

Hearing:

· More than 100,000 profoundly deaf people currently use a bionic ear (cochlear implants that rely on a direct neural connection) that stimulates hearing nerves in the inner ear to understand speech and other sounds. Research is currently focused on enabling cochlear implant users to differentiate between speech and other background sounds.

Mind-Controlled Mobility:

· Although research to provide mobility to and the ability for quadriplegics (that make up about 1.25 million of the world’s population) to operate major appliances such as a television and computer is still in its infancy, significant progress is being made.

o In 2008 a monkey successfully moved a robotic arm via neural implants. In another instance, a rhesus monkey (Idoya) located in North Carolina operated a robot in Japan through thought alone as part of the Computational Brain Project led by neuroscientist Miguel A.L. Nicolelis with researchers at Duke University Medical Center and Japan Science and Technology Agency.

o Researchers at Osaka University in Japan are currently working with four human test subjects, each of whom has had an electrode sheet placed directly on their brain so that they can determine the brain wave activity associated with arm, elbow, and finger movement to discern intended activity to allow mind-controlled movement of future prosthetics. Currently the researchers can determine intended activity with greater than 80% activity.

o At the same time, European scientists have created a non-intrusive brain-computer interface (BCI) (though still in the research and development stage), that utilizes human brain activity and imbedded artificial intelligence to operate devices (e.g. computers, wheelchairs, artificial limbs). BCIs will eventually afford quadriplegics mobility and skills once unimaginable.

Cybernetic Limbs:

· Synthetic parts are routinely used for hip and knee replacements. With regard to the latter, a newly developed knee (presently under limited release in the United States and the Netherlands) that synchronizes motion with a user’s natural leg is so effective that its recipients can easily get up, climb stairs and even engage in extreme sports.

· An arm, dubbed the “Luke Arm” after Luke Skywalker’s character in Star Wars, was developed in which movement can be controlled by nerves, muscles, and Bluetooth®-activated shoe pads enabling armless users to eat, pick up tiny objects and utilize their prosthetic arms and hands in the same way people use natural arms and hands.

· An Australian woman was fitted in 2009 with the world’s first fully functioning artificial finger that can curl and grip like a natural finger through utilization of nerve endings.

· Research is ongoing to find a way to graft metal to bone so that skin can be grown around it creating combination synthetic/biological parts.
· Efforts are also being made to give prosthetic devices artificial intelligence in which micro-implants into muscles and nerves will enable users to move their new limbs solely by thought (consistent with human control of natural limbs).

Cardiac Treatment:

· Ventricular Assist Devices (VAD) are currently in use by patients who although they have some heart function, require artificial assistance to sustain their lives.

· Artificial hearts have been developed with the CardioWest temporary Total Artificial Heart (TAH-t) and AbioCor Replacement Heart having been approved for human use by the Food and Drug Administration (FDA). However, research and development is ongoing for a permanent device. Presently artificial hearts have been generally used on a temporary basis (until a donor heart could be found) with a few exceptions. In one such exception, a patient survived 512 days with an AbioCor device.

Alzheimer’s/Parkinson’s Disease and Epilepsy:

· Per the BBC (13 August 2008) researchers (in 2008) at the University of Reading, in Reading, UK created a multi-electrode array consisting of about 300,000 neurons extracted from a rat fetus to control robotic movement. The cells, kept separate from the robot in a temperature-controlled container (filled with a pink broth solution) fitted with electrodes communicated via Bluetooth® short-wave radio. The objective is to gain a better understanding of neurons with the hope of discovering effective treatments for Alzheimers’s, Parkinson’s Disease (both debilitating neurological disorders; Alzheimer’s adversely impacts memory while Parkinson’s disease is characterized by muscle rigidity, tremors, slowed physical movement, and impaired speech and involuntary functions), and epilepsy (a common neurological disorder characterized by repeated, spontaneous seizures).

Robotics/Computer Technology:

Future robots and computers are likely to utilize living and non-living components alike. Potentially, this could be extremely problematic if such technology is applied in a malevolent or unethical way since it could lead to a new generation of slaves. Accordingly, international protocols (including those pertaining to the ethical treatment of animals) and other safeguards will be required to address these issues as cybernetic technology evolves.

In the meantime, a team of scientists led by Charles Higgins of the University of Arizona Tucson is seeking to transform insects into “high-level sensory robotic controllers [since] artificial vision (which is costly) [currently] can’t beat living systems, which are honed to recognize objects or detect motion”[1]

At the same time, scientists at IBM’s Almaden Research Center and the California Institute of Technology are in the process of developing a new generation of microprocessors that utilize living DNA with the objective of creating smaller, faster, and cheaper devices.

Conclusion:

Cyborgs, once relegated to science fiction have become scientific reality providing vast military/intelligence/law enforcement, medical, and technological prospects. If cybernetic technology is used benevolently and ethically where human thought remains the primary driver in lieu of imposed mind-control, it will open new windows of opportunity – providing greater freedom and improved standards of life, to quadriplegics trapped in their own bodies, to the blind imprisoned in a world of darkness, to the deaf confined in a prison of silence, and to people who with age or injury, will need seamless synthetic replacement parts for those worn down or destroyed. It will also expand human capabilities with regard to speed, sight, communication, and endurance. Finally, when such technology gains widespread acceptance and use, it is likely that the majority of the human race will be cyborg, though not in the way envisioned by science fiction.

_________

[1] The cyborg animal spies hatching in the lab. New Scientist. 6 March 2008.

Additional Sources:

Amanda O’Brien. One giant leap for robokind: cyber limbs. The Australian. 15 August 2009.

William Sutherland is a published poet and writer. He is the author of three books, “Poetry, Prayers & Haiku” (1999), “Russian Spring” (2003) and “Aaliyah Remembered: Her Life & The Person behind the Mystique” (2005) and has been published in poetry anthologies around the world. He has been featured in “Who’s Who in New Poets” (1996), “The International Who’s Who in Poetry” (2004), and is a member of the “International Poetry Hall of Fame.” He is also a contributor to Wikipedia, the number one online encyclopedia and has had an article featured in “Genetic Disorders” Greenhaven Press (2009).

Article Source: http://EzineArticles.com/?expert=William_Sutherland

In the internet we can find various resources dedicated to learning. But since the information remain disorganized, finding those resources even with the power Search Engine giants like Google becomes a difficult task. There are thousands of books and guides, tutorials and blogs. However, whether they contain casual information or personal thoughts or educational valued information cannot be predicted. Nowadays, education can be availed online, and of course you can learn both formally and informally. For a formal online education, you can do this by signing up for an online course offered by various universities.

These online course, are as usual as offline courses, been taught by professors in their respective fields. You will get access to lectures in the field you have chosen ranging from Engineering, Science and Technology, Health etc., You can also opt for levels ranging from certificate courses to Masters and obviously these are paid services.

However, recently top universities have started offering their courses online for free. This means anybody whether a housewife or aged parent can sign-up for those courses for free. There is no restriction of eligibility or a time-table to study. You can learn at your own pace and of course at your convenient times. Only thing required is an inquisitive to learn and accessibility to Internet Service.All human beings are endowed with capabilities to learn, improve and progress.The basic concept behind these educational offerings is that educational opportunity is a mechanism to attain that capacity.

OpenCourseWare is a free and open digital publication of high quality education materials. These materials are organised as courses. Some universities term it as OpenLearningInitiative. OpenCourseWare Consortium was established which has collaborated with more than 200 universities around the world, creating a broad educational content.Open and Free courses are freely available online courses and course materials that enact instruction for an entire course in an online format. Some of the Top-notch universities that are offering such free online education.

Massachusetts Institute of Technology Open Course Ware (OCW) – MIT

Utah State Open Course Ware (OCW) – USU

Carnegie Mellon University Open Learning Initiative (OLI)

Apart from these universities, Open Educational Resources (OER) which are not affiliated to any of the above educational institutions have also taken the initiative to link teaching and learning resources to you. One such OER is oercommons. They offer new way to engage with learning content.

Conclusion

Whether it is an OCW or OLI course or something provided by OER, they do not offer a formal certification after passing the tests at the end of each course, you have joined. You will not earn credits either. Practically, you will be spending hours of your precious time studying these freely offered online courses, just to note an increased Internet Bills. But possibly, you have learnt something which interested you and which you were not able to learn before. Though there is a lot of criticisms about these Free Online Courses, I would like to end it up saying that the time you spent to learn is more better than wasting your time at game parlors or some leisurely places. So, give a tryout to these free online courses and you have enormous topics to learn and you can learn plenty.

Indusekar, the author of this Article is an aspiring Affiliate Marketer from Chennai, India. Visit the Reviews of Top 30 CPA Affiliate Networks Affiliate Networks and Affiliate Programs Directory

Article Source: http://EzineArticles.com/?expert=S_K_Indusekar

Within the past year a new form of stem cell research has begun. Stem cell research has always been riddled with controversy because of the need for human embryos. A new technique is being perfected that allows scientists to take the skin cells off of a patient and essentially transform them into stem cells (this has currently only been done on animals). With a patient’s own stem cells now (from the patients skin, no embryos needed) available they can then convert them into any cell in the body and replicate them. This is huge, and advancements can come quickly now because human embryos aren’t needed and politics won’t get in the way.

Recently The Large Hadron Collider project announced it’s soon-to-be completion. They installed the last major part in this huge under ground particle accelerator. Scientists are hoping by bashing elements and atoms at near light speeds they can unravel many of the mysteries in science and quantum mechanics. The Large Hadron Collider will possibly tell us if there are other dimensions, and possibly make Michio Kaku happy by also letting us know if strings do exist (sub atomic scale) and if String Theory is fact.

Lastly, we are also entering a new telescope type era. The Large Binocular Telescope has officially announced its competition. It has two 8.4 meter mirrors to view the night sky like never before. It will have ten times the resolution of the Hubble Telescope. Coming up we have the Kepler Mission which will look at 100,000 stars and look for earth-like planets in space. We also have the Giant Magellan Telescope, and The Thirty Meter Telescope (Major Funding By Gordon Moore) slated form completion by 2015.

Within the next 10 years these telescopes will be able to confirm if there are truly rocky earth-like worlds out there with the ingredients for life. Our new science is telling us that at least a quarter of all stars have planets orbiting them. Considering that there are about 400 billion stars in our galaxy, and at least 100 billion galaxies, the odds are great for earth-like planets to be around. We already have confirmed multiple rocky slightly larger than earth planets in the habitable zone. With our new technology and telescopes we can see just how many there are, and exactly what their atmospheres are made out of.

Going a step further. It’s possible we will make one of the biggest discoveries of all time within the next 20 years if we continue at the rate of technological advancement that we are going at. We may possibly know the answer to if there is other life out there, not from earth. I personally believe it could simply be there is or isn’t, but the scientific community is saying within 15-20 years we may finally have an answer.

Concluding. We are making huge advancements in medicine, technology, space, and other areas. It’s interesting to see how far we have come as a civilization. Hopefully along with our advancements we still realize how important the simple things are and keep our earth healthy and clean. It is an exciting future, enjoy the ride.

Mike Monahan is the Editor In Chief of Science-News.org

The headquarters for Science News

Article Source: http://EzineArticles.com/?expert=Michael_Monahan

Let’s look at some of the reasons why girls come to the STEM classroom with less of the core skills needed for success in this subject area. Overall, girls and boys play with different kinds of games in early childhood that provide different types of learning experiences. Most girls play games that emphasize relationships (i.e., playing house, playing with dolls) or creativity (i.e., drawing, painting). In contrast, boys play computer and video games or games that emphasize building (i.e., LEGO®), both of which develop problem-solving, spatial-relationship and hands-on skills.

A study of gender differences in spatial relations skills of engineering students in the U.S. and Brazil found that there was a large disparity between the skills of female and male students. These studies attributed female student’s lesser skills set to two statistically significant factors: 1) less experience playing with building toys and 2) having taken less drafting courses prior to the engineering program. Spatial relations skills are critical to engineering. A gender study of computer science majors at Carnegie-Mellon University (one of the preeminent computer science programs in the country) found that, overall, male students come equipped with much better computer skills than female students. This equips male students with a considerable advantage in the classroom and could impact the confidence of female students.

Are these gender differences nature or nurture? There is considerable evidence that they are nurture. Studies show that most leading computer and video games appeal to male interests and have predominantly male characters and themes, thus it is not surprising that girls are much less interested in playing them. A study of computer games by Children Now found that 17% of the games have female characters and of these, 50% are either props, they tend to faint, have high-pitched voices, and are highly sexualized.

There are a number of studies that suggest that when girls and women are provided with the building blocks they need to succeed in STEM they will do as well if not better than their male counterparts. An Introductory Engineering Robotics class found that while males did somewhat better on the pre-test than females, females did as well as the males on the post-test following the class’s completion.

Another critical area of gender difference that teachers of STEM should keep in mind has less to do with actual skills and experience and more to do with perceptions and confidence. For females, confidence is a predictor of success in the STEM classroom. They are much less likely to retain interest if they feel they are incapable of mastering the material. Unfortunately, two factors work against female confidence level: 1) most girls will actually have less experience with STEM course content than their male counterparts and 2) males tend to overplay their accomplishments while females minimize their own. A study done of Carnegie Mellon Computer Science PhD students found that even when male and female students were doing equally well grade wise, female students reported feeling less comfortable. Fifty-three percent of males rated themselves as “highly prepared” in contrast to 0% of females.

It is important to note that many of the learning style differences described above are not strictly gender-based. They are instead based on differences of students with a background in STEM, problem-solving, and hands-on skills learned from childhood play and life experience and those who haven’t had the same type of exposure. A review of the literature on minority students and STEM finds that students of color are less likely to have the STEM background experiences and thus are missing many of the same STEM building blocks as girls and have the same lack of confidence. Many of the STEM curriculum and pedagogy solutions that work for female students will also work for students of color for this reason.

Bridge Classes/Modules to Ensure Core Skills

Teachers will likely see a gap in the core STEM skills of female and minority students for the reasons described above. Below are some solutions applied elsewhere to ensure that girls and women (and students of color) will get the building block STEM skills that many will be missing.

Teachers in the Cisco Academy Gender Initiative study assessed the skill levels of each of their students and then provided them with individualized lesson plans to ensure their success that ran parallel to the class assignments. Other teachers taught key skills not included in the curriculum at the beginning of the course, such as calculating math integers and tool identification and use. Students were provided with additional lab time, staffed by a female teaching assistant, knowing that the female students would disproportionately benefit from additional hands-on experience.

Carnegie-Mellon University came to view their curriculum as a continuum, with students entering at different points based on their background and experience. Carnegie-Mellon’s new frame of a “continuum” is purposefully different than the traditional negative model in which classes start with a high bar that necessitates “remedial” tutoring for students with less experience, stigmatizing them and undermining their confidence. Below is a list of ideas and suggestions that will help ALL students to succeed in the STEM classroom.

1. Building Confidence

How do teachers build confidence in female students who often have less experience than their male counterparts and perceive they are behind even when they are not?

1) Practice-based experience and research has shown that ensuring female students have the opportunity to gain experience with STEM, in a supportive environment, will increase their confidence level.

2) Bringing in female role models that have been successful in the STEM field is another important parallel strategy that should be used to assist your female students in seeing themselves as capable of mastering STEM classes: if she could do it, then I can too!

3) Consistent positive reinforcement by STEM teachers of their female students, with a positive expectation of outcome, will assist them in hanging in there during those difficult beginning weeks when they have not yet developed a technology schema or hands-on proficiency and everything they undertake seems like a huge challenge.

2. Appealing to Female Interests

Many of the typical STEM activities for the classroom appeal to male interests and turn off girls. For example, curriculum in robots often involves monsters that explode or cars that go fast. “Roboeducators” observed that robots involved in performance art or are characterized as animals are more appealing to girls. Engineering activities can be about how a hair dryer works or designing a playground for those with disabilities as well as about building bridges. Teachers should consider using all types of examples when they are teaching and incorporating activities in efforts to appeal female and male interests. Teachers can also direct students to come up with their own projects as a way of ensuring girls can work in an area of significance to them.

Research also shows that there are Mars/Venus differences between the genders and how each engages in technology. Overall, girls and women are excited by how the technology will be used – its application and context. Men will discuss how big the hard drive or engine is, how fast the processor runs, and debate the merits of one motherboard or engine versus another. These are topics that are, overall, of less interest to most females.

The Carnegie-Mellon Study took into account the differences of what engages female students and modified the Computer Science programs’ curriculum so that the context for the program was taught much earlier on in the semester and moved some of the more technical aspects of the curriculum (such as coding) to later in the semester. Authors observed that the female students were much more positive about getting through the tedious coding classes when they understood the purpose of it. Teachers should ensure that the context for the technology they are teaching is addressed early on in the semester by using real world stories and case studies to capture the interest of all of their students.

3. Group Dynamics in the Classroom

Research studies by American Association of University Women and Children Now have found that most females prefer collaboration and not competition in the classroom. Conversely, most males greatly enjoy competition as a method of learning and play. Many hands-on activities in technology classes are set up as competitions. Robotics for example, regularly uses competitiveness as a methodology of teaching. Teachers should
be cognizant of the preference of many girls for collaborative work and should add-in these types of exercises to their classes. Some ways to do this are by having students work in assigned pairs or teams and having a team grade as well as an individual grade. (See Reading 2 on Cooperative Learning.)

Another Mars/Venus dynamic that STEM teachers should be aware of occurs in the lab there male students will usually dominate the equipment and females will take notes or simply watch. Overall, male students have more experience and thus confidence with hands-on lab equipment than their female counterparts. Teachers should create situations to ensure that their female students are spending an equal amount of time in hands-on activities. Some approaches have been: 1) to pair the female students only with each other during labs in the beginning of the class semester so that they get the hands-on time and their confidence increases, putting them in a better position to work effectively with the male students later on, 2) allot a specific time for each student in pair to use the lab equipment and announce when it’s time to switch and monitor this, and 3) provide feedback to male students who are taking over by letting them know that their partner needs to do the activity as well.

4. Moving Female Students from Passive Learners to Proactive Problem Solvers

The main skill in STEM is problem solving in hands-on lab situations. For reasons already discussed regarding a lack of experience, most girls don’t come to STEM classes with these problem-solving skills. Instead, girls often want to be shown how to do things, repeatedly, rather than experimenting in a lab setting to get to the answer. Adding to this issue, many girls fear that they will break the equipment. In contrast, male students will often jump in and manipulate the equipment before being given any instructions by their teacher. Teachers can address this by such activities as: 1) having them take apart old equipment and put it together again, 2) creating “scavenger hunt” exercises that force them to navigate through menus, and 3) emphasizing that they are learning the problem solving process and that this is equally important to learning the content of the lesson and insisting that they figure out hands-on exercises on their own.

Research has also shown that females tend to engage in STEM activities in a rote, smaller picture way while males use higher order thinking skills to understand the bigger picture and the relationship between the parts. Again, moving female students (and the non-techsavvy student in general) to become problem solvers (versus just understanding the content piece of the STEM puzzle) will move them to use higher order thinking skills in STEM.

Finally, many teachers have reported that many female students will often want to understand how everything relates to each other before they move into action in the lab or move through a lesson plan to complete a specific activity. The female students try to avoid making mistakes along the way and will not only want to read the documentation needed for the lesson, they will often want to read the entire manual before taking any action. In contrast, the male student often needs to be convinced to look at the documentation at all. Boys are not as concerned with making a mistake a long the way as long as what they do ultimately works. The disadvantage for female students is that they often are so worried about understanding the whole picture that they don’t move onto the hands-on activity or they don’t do it in a timely fashion, so that they are consistently the last ones in the class to finish. Teachers can assist female (and non-tech-savvy) students to move through class material more quickly by providing instruction on how to quickly scan for only the necessary information needed to complete an assignment.

5. Role Models

Since the numbers of women in STEM are still small, girls have very few opportunities to see female role models solving science, technology, engineering or math problems. Teachers should bring female role models into the classroom as guest speakers or teachers, or visit them on industry tours, to send the message to girls that they can succeed in the STEM classroom and careers.

Bibliography

Medina, Afonso, Celso, Helena B.P. Gerson, and Sheryl A. Sorby. “Identifying Gender Differences in the 3-D Visualization Skills of Engineering Students in Brazil and in the United States”. International Network for Engineering Eucation and Research page. 2 August 2004: [http://www.ineer.org/Events/ICEE/papers/193.pdf].

Milto, Elissa, Chris Rogers, and Merredith Portsmore. “Gender Differences in Confidence Levels, Group Interactions, and Feelings about Competition in an Introductory Robotics Course”. American Society for Engineering Education page. 8 July 2004: [http://fie.engrng.pitt.edu/fie2002/papers/1597.pdf].

“Fair Play: Violence, Gender and Race in Video Games 2001”. Children Now page. 19 August 2004: [http://www.childrennow.org/media/video-games/2001/].

“Girls and Gaming: Gender and Video Game Marketing, 2000”. Children Now page. 17 June 2004: [http://www.childrennow.org/media/medianow/mnwinter2001.html].

Tech-Savvy: Educating Girls in the New Computer Age. District of Columbia: American Association of University Women Educational Foundation, 2000.

Margolis, Jane and Allan Fisher. Unlocking the Computer Clubhouse: Women in Computer. Cambridge, MA: The MIT Press, 2003.

Taglia, Dan and Kenneth Berry. “Girls in Robotics”. Online Posting. 16 September 2004: http://groups.yahoo.com/group/roboeducators/.

“Cisco Gender Initiative”. Cisco Learning Institute. 30 July 2004: http://gender.ciscolearning.org/Strategies/Strategies_by_Type/Index.html.

Donna Milgram is founder and Executive Director of the National Institute for Women in Trades, Technology & Science (IWITTS). She is currently the Principal Investigator of the CalWomenTech Project, a $2 million National Science Foundation grant awarded in April 2006. She was also the Principal Investigator of the WomenTech Project, funded by the National Science Foundation, which had a goal of increasing the number of women enrolled and retained in technology education in three national community college demonstration sites. She led IWITTS’s partnership with the Cisco Learning Institute (CLI)/Cisco Gender Initiative. Ms. Milgram produced the interactive teacher training video “School-to-Work: Preparing Young Women for High Skill, High Wage Careers.”

Additional Resources:

http://www.iwitts.com/

http://www.womentechworld.org/

http://www.womentechstore.com/

Article Source: http://EzineArticles.com/?expert=Donna_Milgram

Breaking the Technology Barrier: Using Technology in Education

Technology and education have always seemed to go together. In order to prepare students for the workplace or college they need to be able to be exposed to it. Teachers in the classroom use technology believing that the students are gaining valuable information and retaining the concepts taught but in reality the students need to be involved in the lesson and actively participating in activities that include technology. Student engagement is critical to student motivation during the learning process. The more students are motivated to learn, the more likely it is that they will be successful in their efforts. (Beeland, 2002).

Uses of Technology

There are numerous uses of technologies that are available to teachers to include students into the classroom’s lesson. These include Interactive Whiteboards, Proximas, PowerPoint games, interactive DVDs, Ventrilo chat software, Myspace, Blackboard, and scavenger hunts. To put the uses of technology into an effective practice, teachers need to help students set achievable goals; encourage students to assess themselves and their peers; help them to work co-operatively in groups and ensure that they know how to exploit all the available resources for learning (Hall, 2006). The following are how some technology is used to help students learn.

Interactive Whiteboards

There are two different types of whiteboards. The first is a virtual version of a dry erase board. It allows students to see what the instructor or other students write or draw using a special pen. The second functions similar to a normal whiteboard but also contains a projector screen, an electronic copy board or as a computer projector screen on which the computer image can be controlled by touching or writing on the surface of the panel instead of using a mouse or keyboard. They function by connecting a projector to the whiteboard panel with the use of a computer and software. It is important to know the different functions in order to determine which whiteboard is right for the educator. By knowing the difference you can also learn the terminology and understand the basic functions of each.

Proximas and PowerPoint

PowerPoint is a software program
that is being used in the classroom as a tool to incorporate learning activities into the curriculum. PowerPoint enables teachers and students to actively create presentations with graphics, charts, diagrams, and pictures in their slideshows to help make often complicated ideas and lessons more manageable and understandable. It is a way for students to engage in research, and present information to their peers. When students are actively learning, taking an active role in the learning process, they seem to understand the information better, and enjoy the lesson. The use of a game also allowed Jones and Mungai to directly address the learning style needs of the visual (58%) and tactile learner (22%), which represents eighty-percent of those involved in the content related courses. When constructed with different learning styles in mind, games can often accelerate the learning process (Jones & Mungai, 2003). By itself PowerPoint is not a cure-all remedy, but rather a tool that needs to be understood and used properly for it to be effective as an active learning tool. It also has shown that students that did use PowerPoint as a learning tool were more engaged in the discussions (Rowcliffe, 2003). This will encourage teachers to use PowerPoint as a way to involve students into a lesson by stimulating discussion. For PowerPoint to take place in a classroom an Interactive Whiteboard or a Proxima is needed. A Proxima displays a computer screen onto a screen much like a projector at a movie theater. The user is able to display items such as websites, PowerPoint, and interactive games. A way for students to interact using this technology is through games created by teachers and used in the PowerPoint lesson. Games such as Hollywood Squares, Jeopardy, and Who Wants to be a Millionaire are created using slides and links to answer the questions. Teachers may use a blank template and fill them with different answers for the students to use as a review. Teachers may even let the students create their own review using the blank templates. This activity can also be used in a small group or team setting.

Advantages to the Students

Learning sciences research tells us that students learn much better “by doing” rather than “by listening.” This means that passive learning – the traditional lecture – is being replaced in our classrooms by more active learning activities that emphasize student problem solving, discussion, presentation and other “authentic” learning-by-doing-activities. (Day, 2004). By including students into the lesson it opens up a realm of possibilities because students can retain roughly only 10% of what they write down.

Teacher Apprehension

So why are teachers not using technology that engages and interacts more frequently with students? There are many reasons why teachers feel apprehensive or uncomfortable using an interactive whiteboard, proxima and PowerPoint. The first of which could be the length of time from their college prep program until now. Teachers often get exposed to and learn new technologies in their teacher prep courses. Some might not have been prepared enough upon entering the workforce. Although the availability of technology in American schools has increased (US Department of Education, 2000), information released by The National Education Association (2004) indicates that less than 35% of public school teachers feel they are “well prepared” or “very well prepared” to use this technology effectively.

The second reason is blockage from the school’s control or security system. Teachers claim that the firewalls and filtering systems create blockage in their attempts to educate and communicate with others with technology (Murray, 2004). The teachers and other users can become frustrated when they do not understand why a certain item like a website used for a scavenger hunt or a hyperlink in a PowerPoint are not available.

The inconsistency from school to school is another reason. At one site there may be access to all different types of technology while at another the absence is very evident. The general public perception is that our schools are using technology and managing our resources in that area well. In several surveys done some schools do show nearly 100 percent use of technology while in others the use of technology is nonexistent (Starr, 2003).

Summary

The research has shown that there are proven benefits to using technology in the classroom. The ability to integrate technology into the classroom can add valuable information and ideas to our students.

By facilitating Proximas, PowerPoint, and interactive whiteboards our teachers will be able to reach a broader audience of learners.

References

Beeland, W.D. (2002). Student engagement, visual learning and technology: can interactive

whiteboards help? Retrieved May 31, 2008, from www.apexavsi.com

Day, J. (2004). Enhancing the classroom learning experience with web lectures. Retrieved May 31, 2008 from http://smartech.gatech.edu/dspace/handle/1853/65

Hall, B. (2008, March 4). Explorations in learning. Message posted to Student Centered Learning, archived at http://secondlanguagewriting.com/explorations/Archives/2006/Jul/Studentcent
eredLearning.html

Jones, D. C. & Mungai, D. (2003). Technology-enabled teaching for maximum learning.

International Journal of Learning, (10), 3491-3501.

Murray, C. (2004). Teachers: Limited time, access cut school tech use [Electronic version] e School news, 1-5

National Education Association. (2004): Technology in Schools. Retrieved May 31, 2008 from

http://www.nea.org/cet/

Rowcliffe, S. (2003) Using PowerPoint effectively in science education: lessons

from research and guidance for the classroom. School Science Review 84 (309).

Starr, L. (2003). Encouraging teacher technology use [Electronic Version] Education World, pg 1

US Department of Education. (2000). Internet access in public schools. Washington, DC: National Center for Education Statistic.

About the Author

Patrick Wellert

Want to Own a Franchise?
Join the Worlds Leader in Science Education and Entertainment
www.MadScience.org

MSc Project Mgmt (UK)
Develop career w/ APM, PMI course Study online or full-time in Sept.
www.rgu.ac.uk/abs/postgraduate

Study in Australia
Learn English in Australia. Find out more now!
StudiesInAustralia.com/LearnEnglish

Portable Planetariums
Four Distinct Educational Models Consulting Educators for 36 Years
mmicorporation.com

Study Education Abroad
1000s Education Courses Abroad Find Out More & Apply Online Now
StudyLink.com/Study-Education
Syndicate this Article Copy to clipboard
<h1>The Concept of Science Fair and Its Importance on Science Education</h1><strong>Author: <a title=”Kh. Atiar Rahman” href=”http://www.articlesbase.com/authors/kh.-atiar-rahman/24714.htm”>Kh. Atiar Rahman</a></strong><br /><p>The concept of science fair has been come down to us from European education pattern and their growth of culture. They firstly thought ” Science fair must be based on creativity by cultivating knowledge and intelligence of the learners”. Indeed, science fair needs to be introduced in different educational institutions by considering its pedagogical phenomena based on practical knowledge and skills. Hence, there is no alternate of practical knowledge to gain proper education in the field of Science and Technology and hence the steps for science fair is needed as a taken of creativity and awareness for acquiring knowledge among the students. Hence, the steps for science fair in the educational institute are ideally envisaged and contemporary.<br /><br />In our country, every year science fair is held in different educational institute annually to create motivation of research work and enthusiasm. The teachers first collect the names and list them that they will create a project based on science and technology. The students who are found interested to introduce a new science work take a challenge and become capable of showing a different creative work. He selects a project and thinks over the work and the nature of technology behind it. Actually, he becomes responsible of inventing something like a scientist. So, it is found off and on that the students are being able to show a nice presentation in science fair. He sometimes shows something different from modern age. They can project from ancient and mediaeval age. <br /><br />The authority of different schools and colleges arrange science fair in order to show the eagerness of actual knowledge and skills among the students. At this, a congenial atmosphere is developed in the institution because, they are concerning their heads about new inventions and discovery and they become conscious of awakening their ideas and thoughts. In the context of Bangladesh, every year different schools and colleges arrange science fair. They first invite names from the interested students who are willing to make the project work and to focus it in the science fair. They, like the scientists carry on research work like making law, hypothesis and theory. They seek respective ideas from different books and the achievement of scientists of the world. At last they present their creativity and thus a systematic project is reflected.<br /><br />Arranging science fair is a significant step of different educational institutions through which an intensified effort is led to flourish and enrich the knowledge and skills on application of science for the students. It is hoped in future that the steps to arrange science fair is a predominating criteria to strengthen the cultivation of knowledge in applying the definitive sense of technical know- how of science. A science fair is quite different from other fairs existing in our country like a village fair and an industrial fair and so on. These fairs serve the purpose of the business where the commodities of qualitative nature are sold and displayed for making profit in question. Here, the commodities are served in the market in such a manner, where the companies good will and the nature and quality of product are vividly disclosed so that the people are much attracted to purchase it to a great extent. Besides this, in organizing science fair, the business importance is not treated as the prime factor; rather the pedagogical manifestation to gear up the intensity and potentiality of the students is given priority. Actually, the eagerness for knowing the unknown world is reflected and a better environment is flourished among the students in any educational institute where science and technology are studied extensively. Even though, there has been provided a wide range to the students in European countries for creating a broad based project as a part of their education. The students who are found attracted for learning technological skills and knowledge generally shines in life by contributing a lot in the field of education. For science fair, the following things are important:<br /><br />• Environment: Like western country, appropriate environment is needed where necessary equipment will play a vital role. In many cases, only theoretical teachings are offered beside practical knowledge and skills. It is a matter of great regret that the students are deprived of gaining actual knowledge in the relevant field. Besides this, technological instruments need to be placed in different institutions so that the utilization of those equipment are properly made in a systematic manner.<br /><br />• Knowledge and skills relating to science fair: The teacher should select a number of topics before allocating on the project work to the students and they should give knowledge on the steps of spreading and analyzing the topics in question. He should engage himself in creating awareness and necessary skills in the field of the application of mathematical model of science based on constructive exploration of modern appliances. The teacher should set problems on real life situation like building a model of the relevant topics. The problems must be based on practically oriented which set forth the topics covering science and its technological aspects of nature. Assuming in a teaching classroom, on Modern and electronic physics is going on. The students are feeling boring because the teacher was not well dressed and well rested. Rather he has arrived late and he has not greeted them. Some students do not understand his lecture. He is running fast. He is not identifying and helping the less able students. In this case, despite his sound knowledge in the relevant field of modern physics, he may not be treated as a good teacher. Henry Fayol defines a teacher as an active student of the students who can play very much attractive and fascinate role upon overall performances in the class. An ideal teacher needs to play a vital role in active advisor among the students. He needs to be careful about the criteria on Control, Guide, Consult and Facilitate. He should have meaningful learning experience with which he can produce constructive and mathematical presentation for creating awareness for teaching in a significant manner.<br /><br />Being a science teacher, his attitude may vary according to the nature of the students’ subject area and to substantiate the actual skills. He needs to be very careful in using his voice for effective teaching. In our country, in many cases, the parents regarding performance of the teacher lodge complaints. A good teacher need not be excited and agitated towards the students. He should give chance to ask question to the students so that transfer of behaviour is made possible in a significant manner. According to Franchise Bacon, there are two types of learning: One is Pedagogy- children’s learning and the other is Andragoggy- Adult learning. In case of adult learning, we cannot teach anybody, we only help him or her to learn. So in the case of using our voice we need to be responsible and tactful. <br />That is to say, a teacher’s behaviour will be in such, which must attract the students for effective and efficient delivery of the relevant topics.<br /><br />In delivering lecture on the topics of science, there are limitations, which may create hindrance to learning on the part of the students. Sometimes the lecture may be monotonous and boring due to continuous saying and without emphasising practical orientation and presentation on the applicability of science and technology. If there exists dryness amongst the students, the teacher should change the policy of his lecture. He should ask open-ended questions. Open ended questions help get the students involved. Assuming to know a particular thing, one may get interested if he is intended to know those particular items. In many cases, it is found that the teachers are not well experienced and they have no meaningful learning experience to show the actual answer of the problem and the topics. Even, without sufficient skills and knowledge, they are appointed as teacher which is totally insignificant. Some of the limitations of delivering a lecture are as follows:<br /><br /> To ask question for ‘Yes’/ No answer.<br /> Not to ask open ended question to get people involved.<br /> Not to use agitated words<br /> Not to say repeatedly while delivering lecture<br /> Not to ask meaningful questions<br /> To ask several question at a time<br /> Not to give feedback on answers yourself, or involve others<br /> Not to give people a chance to absorb the question and answer it.<br /> Not to welcome answers<br /> To be critical in answering and asking questions.<br /><br />An ideal science teacher needs to be well conversant about using the language. It is indispensable to create awareness and congenial atmosphere on the part of a teacher. The following are the different ways to improve lecture.<br /><br /> To manage intersperse lecture with opportunities to challenge and discuss what is being delivered. In case of critical problem, he needs to synchronise and simplify it so that the actual topics become easy and understandable.<br /> To break the students into groups for exercises which develop lecture themes and need to be reported back and analysed. Specifically, in presenting nuclear and magnetic topics, he needs to show it with necessary apparatus and relevant calculations.<br /> To use case studies, which challenge students to apply the teaching, they are being given. Normally, chapter wise topics are needed to diversify to present the topics on practical themes and critics.<br /> To use Video record teaching sessions and analyse progress and results.<br /> To use role-plays to demonstrate examples of what is said in lectures.<br /> To split into teams which analyse the days lecture theme and give a resume of it on same / next day.<br /> To be prepared to facilitate and contribute to discussions and help groups prepare feedback.<br /> To develop feedback techniques on what a teacher observes groups doing.<br /> Self will agent<br /><br />Regarding the teaching method, the following are important to apply in teaching the students virtually.<br /> Telling is not teaching<br /> Age is not a bar to learn<br /> Meaningful learning experience<br /> Voice, image and body use<br /> Practically oriented way of teaching<br /> Repeat, Recap and Review<br /> Mnemonics<br /> Visual Hearing and Feeling and F-ULLER<br /><br />In view of the above, a good teacher selects any method to teach the students but according to Franchise Bacon, most of the good teachers select the sixth Rule of teaching that is ‘ Repeat, Recap, Review ‘ which is the most important one to make the teaching vitally effective, meaningful, fruitful and up to the mark <br /><br />The reasons in support of the argument are stated as follows. <br /><br />Repeat: According to Franchise Bacon, ‘when you tell something in the class to a group of students, it is only a saying but when you recapitulate it, repeat it and ask the question on the progress, it will be interacted and if you further emphasize the concept, they will be conversant with the relevant knowledge’. Indeed, incase of delivering an important message, if it is stated once-only 10% will be memorized but if it is stated 6 times then 90% are memorized after one year. So, reiteration/repetition is the most important tools for the teaching to make the topics rememberable. If the message is not remembered and understandable then the whole thing will be treated as useless.<br /><br />Recap: It is generally meant by recap to go over again the vital point of the relevant contents. Using FULLE-R and VHF for better memorization can do the recap. As the first events are best memorized so to start with big message. Thereafter unusual event like cartoon, exercise etc. be used. Thirdly, linked event, here mnemonics or analogy can be used and lastly to end with big messages of fascination towards the topics. In this context, summing up the ideas to arrive the conclusion that is the gist in question to be communicated to the students as a good communicator of the teaching course. We should remember one thing that ‘ Telling is not teaching; we need to make teaching active and interesting; get students involved; see it from the student’s view; we should use VHF and FULL-R. According to Commoneus, a famous educationist, for an effective teaching, ‘only lecture is immaterial but in order to ornament it for better memorization, ideal approach, demonstration, visual display and varieties of attractions of the students are needed’<br /><br />Review: A proverb always goes like ‘ To err is human’. It is human nature to forget the things/message, which is not reviewed that are we losing what we don’t review. To review we are to regularly sum up where we have reached and invited questions.<br />At the end of every topics if the teacher repeats, recap and review, ask questions and help them to answer properly, the trainees will be more motivated and conversant with the subjects and grasp it properly so that teaching will be effective and fruitful.<br /><br />In view of the above, it is obvious that the role of teachers for science education cannot be ignored. The expansion of science fair is inevitable in the domain of practical oriented type of teachings where a student will achieve proper knowledge in creating constructive project work that will be ultimately helpful for the country. If the educational institutions emphasise technological aspects on science, the integrity to work in the field of science and its application of science fair will be enhanced intensively. As a result the country will be much benefited in due sense of technology.</p><strong>About the Author:</strong><br /><p>Kh. Atiar Rahman’s articles are based on real life situation. he has worked hard to present his theme on the relevant topics with utmost efforts.He has many publications in national and International Media.<br /> He was born in the former Kushtia district in 1955</p><p>Article Source: <a href=”http://www.articlesbase.com/”>ArticlesBase.com</a> – <a href=”http://www.articlesbase.com/education-articles/the-concept-of-science-fair-and-its-importance-on-science-education-200444.html” title=”The Concept of Science Fair and Its Importance on Science Education”>The Concept of Science Fair and Its Importance on Science Education</a></p>

The concept of science fair has been come down to us from European education pattern and their growth of culture. They firstly thought ” Science fair must be based on creativity by cultivating knowledge and intelligence of the learners”. Indeed, science fair needs to be introduced in different educational institutions by considering its pedagogical phenomena based on practical knowledge and skills. Hence, there is no alternate of practical knowledge to gain proper education in the field of Science and Technology and hence the steps for science fair is needed as a taken of creativity and awareness for acquiring knowledge among the students. Hence, the steps for science fair in the educational institute are ideally envisaged and contemporary.

In our country, every year science fair is held in different educational institute annually to create motivation of research work and enthusiasm. The teachers first collect the names and list them that they will create a project based on science and technology. The students who are found interested to introduce a new science work take a challenge and become capable of showing a different creative work. He selects a project and thinks over the work and the nature of technology behind it. Actually, he becomes responsible of inventing something like a scientist. So, it is found off and on that the students are being able to show a nice presentation in science fair. He sometimes shows something different from modern age. They can project from ancient and mediaeval age.

The authority of different schools and colleges arrange science fair in order to show the eagerness of actual knowledge and skills among the students. At this, a congenial atmosphere is developed in the institution because, they are concerning their heads about new inventions and discovery and they become conscious of awakening their ideas and thoughts. In the context of Bangladesh, every year different schools and colleges arrange science fair. They first invite names from the interested students who are willing to make the project work and to focus it in the science fair. They, like the scientists carry on research work like making law, hypothesis and theory. They seek respective ideas from different books and the achievement of scientists of the world. At last they present their creativity and thus a systematic project is reflected.

Arranging science fair is a significant step of different educational institutions through which an intensified effort is led to flourish and enrich the knowledge and skills on application of science for the students. It is hoped in future that the steps to arrange science fair is a predominating criteria to strengthen the cultivation of knowledge in applying the definitive sense of technical know- how of science. A science fair is quite different from other fairs existing in our country like a village fair and an industrial fair and so on. These fairs serve the purpose of the business where the commodities of qualitative nature are sold and displayed for making profit in question. Here, the commodities are served in the market in such a manner, where the companies good will and the nature and quality of product are vividly disclosed so that the people are much attracted to purchase it to a great extent. Besides this, in organizing science fair, the business importance is not treated as the prime factor; rather the pedagogical manifestation to gear up the intensity and potentiality of the students is given priority. Actually, the eagerness for knowing the unknown world is reflected and a better environment is flourished among the students in any educational institute where science and technology are studied extensively. Even though, there has been provided a wide range to the students in European countries for creating a broad based project as a part of their education. The students who are found attracted for learning technological skills and knowledge generally shines in life by contributing a lot in the field of education. For science fair, the following things are important:

• Environment: Like western country, appropriate environment is needed where necessary equipment will play a vital role. In many cases, only theoretical teachings are offered beside practical knowledge and skills. It is a matter of great regret that the students are deprived of gaining actual knowledge in the relevant field. Besides this, technological instruments need to be placed in different institutions so that the utilization of those equipment are properly made in a systematic manner.

• Knowledge and skills relating to science fair: The teacher should select a number of topics before allocating on the project work to the students and they should give knowledge on the steps of spreading and analyzing the topics in question. He should engage himself in creating awareness and necessary skills in the field of the application of mathematical model of science based on constructive exploration of modern appliances. The teacher should set problems on real life situation like building a model of the relevant topics. The problems must be based on practically oriented which set forth the topics covering science and its technological aspects of nature. Assuming in a teaching classroom, on Modern and electronic physics is going on. The students are feeling boring because the teacher was not well dressed and well rested. Rather he has arrived late and he has not greeted them. Some students do not understand his lecture. He is running fast. He is not identifying and helping the less able students. In this case, despite his sound knowledge in the relevant field of modern physics, he may not be treated as a good teacher. Henry Fayol defines a teacher as an active student of the students who can play very much attractive and fascinate role upon overall performances in the class. An ideal teacher needs to play a vital role in active advisor among the students. He needs to be careful about the criteria on Control, Guide, Consult and Facilitate. He should have meaningful learning experience with which he can produce constructive and mathematical presentation for creating awareness for teaching in a significant manner.

Being a science teacher, his attitude may vary according to the nature of the students’ subject area and to substantiate the actual skills. He needs to be very careful in using his voice for effective teaching. In our country, in many cases, the parents regarding performance of the teacher lodge complaints. A good teacher need not be excited and agitated towards the students. He should give chance to ask question to the students so that transfer of behaviour is made possible in a significant manner. According to Franchise Bacon, there are two types of learning: One is Pedagogy- children’s learning and the other is Andragoggy- Adult learning. In case of adult learning, we cannot teach anybody, we only help him or her to learn. So in the case of using our voice we need to be responsible and tactful.
That is to say, a teacher’s behaviour will be in such, which must attract the students for effective and efficient delivery of the relevant topics.

In delivering lecture on the topics of science, there are limitations, which may create hindrance to learning on the part of the students. Sometimes the lecture may be monotonous and boring due to continuous saying and without emphasising practical orientation and presentation on the applicability of science and technology. If there exists dryness amongst the students, the teacher should change the policy of his lecture. He should ask open-ended questions. Open ended questions help get the students involved. Assuming to know a particular thing, one may get interested if he is intended to know those particular items. In many cases, it is found that the teachers are not well experienced and they have no meaningful learning experience to show the actual answer of the problem and the topics. Even, without sufficient skills and knowledge, they are appointed as teacher which is totally insignificant. Some of the limitations of delivering a lecture are as follows:

 To ask question for ‘Yes’/ No answer.
 Not to ask open ended question to get people involved.
 Not to use agitated words
 Not to say repeatedly while delivering lecture
 Not to ask meaningful questions
 To ask several question at a time
 Not to give feedback on answers yourself, or involve others
 Not to give people a chance to absorb the question and answer it.
 Not to welcome answers
 To be critical in answering and asking questions.

An ideal science teacher needs to be well conversant about using the language. It is indispensable to create awareness and congenial atmosphere on the part of a teacher. The following are the different ways to improve lecture.

 To manage intersperse lecture with opportunities to challenge and discuss what is being delivered. In case of critical problem, he needs to synchronise and simplify it so that the actual topics become easy and understandable.
 To break the students into groups for exercises which develop lecture themes and need to be reported back and analysed. Specifically, in presenting nuclear and magnetic topics, he needs to show it with necessary apparatus and relevant calculations.
 To use case studies, which challenge students to apply the teaching, they are being given. Normally, chapter wise topics are needed to diversify to present the topics on practical themes and critics.
 To use Video record teaching sessions and analyse progress and results.
 To use role-plays to demonstrate examples of what is said in lectures.
 To split into teams which analyse the days lecture theme and give a resume of it on same / next day.
 To be prepared to facilitate and contribute to discussions and help groups prepare feedback.
 To develop feedback techniques on what a teacher observes groups doing.
 Self will agent

Regarding the teaching method, the following are important to apply in teaching the students virtually.
 Telling is not teaching
 Age is not a bar to learn
 Meaningful learning experience
 Voice, image and body use
 Practically oriented way of teaching
 Repeat, Recap and Review
 Mnemonics
 Visual Hearing and Feeling and F-ULLER

In view of the above, a good teacher selects any method to teach the students but according to Franchise Bacon, most of the good teachers select the sixth Rule of teaching that is ‘ Repeat, Recap, Review ‘ which is the most important one to make the teaching vitally effective, meaningful, fruitful and up to the mark

The reasons in support of the argument are stated as follows.

Repeat: According to Franchise Bacon, ‘when you tell something in the class to a group of students, it is only a saying but when you recapitulate it, repeat it and ask the question on the progress, it will be interacted and if you further emphasize the concept, they will be conversant with the relevant knowledge’. Indeed, incase of delivering an important message, if it is stated once-only 10% will be memorized but if it is stated 6 times then 90% are memorized after one year. So, reiteration/repetition is the most important tools for the teaching to make the topics rememberable. If the message is not remembered and understandable then the whole thing will be treated as useless.

Recap: It is generally meant by recap to go over again the vital point of the relevant contents. Using FULLE-R and VHF for better memorization can do the recap. As the first events are best memorized so to start with big message. Thereafter unusual event like cartoon, exercise etc. be used. Thirdly, linked event, here mnemonics or analogy can be used and lastly to end with big messages of fascination towards the topics. In this context, summing up the ideas to arrive the conclusion that is the gist in question to be communicated to the students as a good communicator of the teaching course. We should remember one thing that ‘ Telling is not teaching; we need to make teaching active and interesting; get students involved; see it from the student’s view; we should use VHF and FULL-R. According to Commoneus, a famous educationist, for an effective teaching, ‘only lecture is immaterial but in order to ornament it for better memorization, ideal approach, demonstration, visual display and varieties of attractions of the students are needed’

Review: A proverb always goes like ‘ To err is human’. It is human nature to forget the things/message, which is not reviewed that are we losing what we don’t review. To review we are to regularly sum up where we have reached and invited questions.
At the end of every topics if the teacher repeats, recap and review, ask questions and help them to answer properly, the trainees will be more motivated and conversant with the subjects and grasp it properly so that teaching will be effective and fruitful.

In view of the above, it is obvious that the role of teachers for science education cannot be ignored. The expansion of science fair is inevitable in the domain of practical oriented type of teachings where a student will achieve proper knowledge in creating constructive project work that will be ultimately helpful for the country. If the educational institutions emphasise technological aspects on science, the integrity to work in the field of science and its application of science fair will be enhanced intensively. As a result the country will be much benefited in due sense of technology.

About the Author

Kh. Atiar Rahman’s articles are based on real life situation. he has worked hard to present his theme on the relevant topics with utmost efforts.He has many publications in national and International Media.
He was born in the former Kushtia district in 1955

The project has been jointly undertaken by the National Council of Science and Technology Communication (NCSTC), Ministry of Science and Technology; Unesco, Central Institute of Education (CIE), Delhi University; and Society for Education and Social Development (SESD). The project also has an active involvement of experts from the National Council of Educational Research and Training (NCERT), Homi Bhabha Centre for Science Education (HBCSE) Mumbai, Delhi University Centre for Science Education and Communication, Institute for Life Long Learning (ILLL) Delhi University, Jamia Milia Islamia University, colleges of Delhi University, IP University, Ignou, DIETS, schools of Delhi, among others.

While announcing the launch of the project, Warren Mellor, director, Unesco, said that the outcomes of the project would have an impact not only at a national level but in other countries as well. On teacher education, Mohd Akhtar Siddiqui, chairperson, National Council for Teacher Education (NCTE), emphasized that it’s the teachers who make all the difference in making a subject interesting and not textbooks or curriculum, hence, they need to be empowered. “This project would validate the science resources and also popularize them across the country,” he added.

The focus of the project would be to pedagogically evaluate the sampled science kits from sources like department of science and technology (DST), HBCSE, NCERT and to enrich them further. The kits would be accompanied by manuals/handbooks and ICT backup so that it can be further disseminated. These packages would be tried out with teacher educators, teachers and students in schools of Delhi, to begin with, and also with community based organizations.

Elaborating further, US Sharma, general secretary, Society for Education and Social Development, said: “The project will be completed in two phases and we also plan to take it to an international level.”

About the Author

Andrew

The reality is that overall women tend to have less experience with technology than their male counterparts, whether we are talking about computer technology or auto technology. Instructors who are successful in retaining female students recognize that they need to start with the basics during the beginning of the semester so that the less experienced students get the basic building blocks needed to be successful (this is helpful to male students missing those basics too). So that might mean an introduction to tool identification and use or the basics of navigating the Internet. Instructors should also provide open lab time for students in need of additional hands-on experience. If possible, staff the lab with a senior female student, women are often more comfortable asking questions of other women in a male-dominated field. For some best practice case study examples that illustrate these concepts look at the Cisco Gender Initiative’s Best Practice Case Studies developed by the Institute for Women in Trades, Technology and Science (IWITTS) (1).

Step Two: Collaborative Learning in the Technology Classroom

Many female students lack confidence in the classroom and this negatively impacts their learning ability. There are several reasons for this: first, overall, male students have more experience with technology, especially hands-on labs; second, male students tend to boast of their accomplishments while females tend to think that they are doing poorly even when they are doing well; third, male students tend to dominate in classroom discussions and lab activities.

Technology instructors can overcome these factors by using collaborative group methods in the classroom designed to increase student learning, interaction and support of each other. Some examples of these group methods are: 1) grade students in teams as well as individually; 2) put female students in positions of leadership in the classroom; 3) assign students to teams or pairs rather than leaving it up to them to pick their partners; 4) have female students work together in labs during the beginning of the semester; 5) enlist the help of whiz kids with the teaching of their fellow students, providing them with a constructive outlet for their talents.

Step Three: Contextual Learning

The recent adage that women are from Mars and men are from Venus is alive and well in the technology classroom — women and men have different learning styles when it comes to technology. Most men are excited by the technology itself — how fast it is, the number of gigabytes, the size of the engine. Most women are engaged by how the technology will be used — how quickly the network will run, how much information can be stored, how far the vehicle can go without refueling. These Mars and Venus differences have implications for the class curriculum: female students will better understand technical concepts in the classroom when they understand the context for them. Don’t front load your computer programming classes with writing computer code with no context for this if you want to retain most of your female students. For more information on this subject including off-the-shelf curriculums for teaching contextual technology read IWITTS’s Making Math and Technology Courses User Friendly to Women and Minorities: An Annotated Bibliography (2).

Step Four: The Math Factor

Most technology courses require an understanding of applied math. Many women and girls are fearful of math and have had negative experiences in the math classroom. This phenomenon is so common that courses and curriculum on math anxiety for women are in place around the country. The key to success in teaching most females math is — like technology — contextual and group learning. Fortunately many off-the-shelf curriculums exist for teaching math contextually, see IWITTS’s bibliography linked above. Many technology courses at the two-year college level have math prerequisites that are unrelated to the technology coursework and omit the applied math that will be needed. Technology courses should only require math that is relevant to their courses and/or develop contextual math modules to add to their curriculum.

Step Five: Connect the Women in Your Classes with Other Women

A female mentor or peer support network can help your students stay the course when they are feeling discouraged and can provide helpful tips for succeeding in a predominantly male environment. There are many on-line and real-time associations for women in technology, connect your female students to them. See the Career Links on WomenTechWorld.org for a list of some of these networks. Also, WomenTechTalk on WomenTechWorld.org — a free listserv for women in technology and students — provides a combination of support and expert career panels to it’s over 200 members from across the U.S.

Donna Milgram is founder and Executive Director of the National Institute for Women in Trades, Technology & Science (IWITTS). She is currently the Principal Investigator of the CalWomenTech Project, a $2 million National Science Foundation grant awarded in April 2006. She was also the Principal Investigator of the WomenTech Project, funded by the National Science Foundation, which had a goal of increasing the number of women enrolled and retained in technology education in three national community college demonstration sites. She led IWITTS’s partnership with the Cisco Learning Institute (CLI)/Cisco Gender Initiative. Ms. Milgram produced the interactive teacher training video “School-to-Work: Preparing Young Women for High Skill, High Wage Careers.” Ms. Milgram’s recent conference presentations include: the NSF ATE Conference “Recruiting Women to Science, Technology, Engineering & Math” (2004) and California Educating for Careers Conference in 2003.

Bibliography: (1) http://gender.ciscolearning.org/Strategies/Strategies_by_Region/North_America/United_States/Index.html

(2) http://www.iwitts.com/assets/1.5_BiblioMathTechFriendly.PDF

Additional Resources:

http://iwitts.com

Article Source: http://EzineArticles.com/?expert=Donna_Milgram